Advanced Solar Photonics is Now Selling Solar Panels!

Lake Mary, Fl., June 17, 2009 – Advanced Solar Photonics (ASP), the cutting-edge developer of monocrystalline solar panels manufactured with one hundred percent American made components announced today that its SunPanels™ are now on sale.

“We are excited to announce that Advanced Solar Photonics is officially taking orders," said ASP’s Corporate Marketing and Public Relations Manager, Maureen McHale. “Any order placed now will only have a four to eight week lead time.”

Over the last few years, Advanced Solar Photonics has focused on becoming a fully integrated solar solution provider. Through strategic partnerships, ASP has been able to keep costs down and offer the competitively priced SunPanel™ turn-key system. This solution will include a patented method for ground installation, mounting, inverter, wiring and all the necessary hardware components. Combined, these factors enable ASP to offer a lower cost on the balance of the system.

“ASP is essentially a one stop shop for solar energy solutions because we are fully integrated. Whether you’re an installer or distributor looking to purchase just the solar panels or have the need for a full turn-key system, we’d like to talk to you about our competitively priced solar solutions. We are actively growing our installer and distributor network as we build our manufacturing facility up to a 500MW production plant”, said McHale.

ASPs’ manufacturing plant is slated to grow in 50MW increments over the next two years to reach the 500MW capacity. The monocrystalline silicon SunPanels™ being produced are one of the most efficient solar modules on the market today. After years of product development – including research and development, manufacturing process development, fabrication and product testing, engineering, and factory construction, ASP is officially open for business with SunPanels™ now on sale.

“When looking at other manufacturers and deciding which panel you’d want to sell or even install in your own home, it’s important to know, unlike any other company, ASPs' monocrystalline panels are 100% made from US components. Additionally, ASP is the only manufacturer of solar panels in the state of Florida and strives to be the largest solar manufacturing plant in the United States”, said McHale.

Advanced Solar Photonics, (ASP) located in Lake Mary, Florida employs an international team of technology driven professionals. ASPs’ monocrystalline solar panels and commercial solar solutions for the photovoltaic industry are ideal for residential, commercial and utility projects. For more information about our company and our solar solutions, please call (407) 804-1000 or visit our website at http://www.advancedsolarphotonics.com/.

100% American Made Solar Panels

Lake Mary, Fl., May 7, 2009 – Advanced Solar Photonics (ASP) announced today that the company’s monocrystalline solar panels which are slated to come off the line in July of 2009, will be one hundred percent American made.

“We are very proud to be the only monocrystalline solar panel manufacturer that can say our panels are completely made in the United States,” said ASPs’ Corporate Marketing and Public Relations Manager, Maureen McHale.

Currently, clean rooms are in place, equipment is being installed and a pilot line will be up and running within the next few weeks to allow for full certification. Starting at 5MW in July and ramping up to 100MW at the end of 2009, ASP will increase production capacity by 50MW every quarter thereafter to be at 500MW by 2011. Additionally, full thin film production is scheduled to ramp up to 40MW by late 2010.

“Our SolarFAB™ facility will not only be largest thin film and monocrystalline solar manufacturing plant in the United States, but unlike any other company, 100% of the components and materials for our monocrystalline panels will be made in America. Even the equipment used for production is made in the United States.” said McHale.

This new facility will not only manufacture American made solar products, but will also be responsible for the creation of green jobs. ASP expects to hire approximately 200 people by the end of the summer of 2009 and another 1300 over the next two years.

Advanced Solar Photonics, (ASP) located in Lake Mary, Florida employs an international team of technology driven professionals. ASP’s cutting-edge laser equipment for solar panel processing, solar cells, and commercial solar products for the solar industry is applicable to both the silicon and thin-film processes.

Media Contact:
Maureen McHale
Corporate Marketing and Public Relations Manager
mmchale@advancedsolarphotonics.com
407-829-2613 x317
www.advancedsolarphotonics.com

The SolarFAB in the News - on Nanowerk

As seen on Nanowerk – the world's most comprehensive nanotechnology and nanoscience resources...

Advanced Solar Photonics Expands SolarFAB Facility to Manufacture Thin Film and Mono-Crystalline Solar Modules

(Nanowerk News) Advanced Solar Photonics, (ASP), the cutting-edge developer of laser marking, scribing, edge deletion and edge isolation systems for the solar industry, has increased the product line for its previously announced SolarFAB™ project in Lake Mary, Florida to include not only thin film, but also mono-crystalline solar modules.

“Originally, our SolarFab™ production plant would only manufacture thin film modules, up to 40MW. However, due to high response for our panels, Advanced Solar Photonics will not only be producing thin film, but also mono-crystalline panels,” said Maureen McHale, Corporate Marketing and Public Relations Manager for ASP. “This new silicon line would initially be 25MW, ramping up to 50MW in a fairly short span of time. Within 2 years it's possible we'll be at 500MW of monocrystalline modules.”

Having securing a 318,000 square foot facility within the last year, ASP is in the assembly stage of developing the two lines. Clean rooms are in place, equipment is starting to arrive and a pilot line will be up and running within the next few weeks. The first mono-crystalline panels are slated to some off the line by the end of the summer, 2009. Full thin film production is scheduled to ramp up by late 2010.

“Adding another dimension to the manufacturing plant not only allows us to meet customer demands, it also increases job creation for the Central Florida area. Up from projecting approximately 200 green jobs, we now estimate SolarFAB™ will employ 1500 people,” said McHale.

With the dependence on foreign oil, environmental degradation and the vulnerability of power networks, SolarFAB™ SunPanels™, both thin film and the new mono-crystalline, will help meet government and consumers’ growing demand for increasingly efficient and cost- effective solar power.

Advanced Solar Photonics, located in Lake Mary, Florida employs an international team of technology driven professionals. Reaching out to the photovoltaic industry, ASP strives to lower manufacturing costs utilizing proven patented technology geared to improve and lower the cost per kilowatt. This technology is applicable to both the silicon and thin film processes.

The SolarFAB in the News!

As seen on AZoNano.com...

Advanced Solar Photonics Expands SolarFAB Facility to Manufacture Thin Film and Mono-Crystalline Solar Modules

Advanced Solar Photonics, (ASP), the cutting-edge developer of laser marking, scribing, edge deletion and edge isolation systems for the solar industry, has increased the product line for its previously announced SolarFAB™ project in Lake Mary, Florida to include not only thin film, but also mono-crystalline solar modules.

“Originally, our SolarFab™ production plant would only manufacture thin film modules, up to 40MW. However, due to high response for our panels, Advanced Solar Photonics will not only be producing thin film, but also mono-crystalline panels,” said Maureen McHale, Corporate Marketing and Public Relations Manager for ASP. “This new silicon line would initially be 25MW, ramping up to 50MW in a fairly short span of time. Within 2 years it's possible we'll be at 500MW of monocrystalline modules.”

Having securing a 318,000 square foot facility within the last year, ASP is in the assembly stage of developing the two lines. Clean rooms are in place, equipment is starting to arrive and a pilot line will be up and running within the next few weeks. The first mono-crystalline panels are slated to some off the line by the end of the summer, 2009. Full thin film production is scheduled to ramp up by late 2010.

“Adding another dimension to the manufacturing plant not only allows us to meet customer demands, it also increases job creation for the Central Florida area. Up from projecting approximately 200 green jobs, we now estimate SolarFAB™ will employ 1500 people,” said McHale.

With the dependence on foreign oil, environmental degradation and the vulnerability of power networks, SolarFAB™ SunPanels™, both thin film and the new mono-crystalline, will help meet government and consumers’ growing demand for increasingly efficient and cost- effective solar power.

Advanced Solar Photonics, located in Lake Mary, Florida employs an international team of technology driven professionals. Reaching out to the photovoltaic industry, ASP strives to lower manufacturing costs utilizing proven patented technology geared to improve and lower the cost per kilowatt. This technology is applicable to both the silicon and thin film processes.

Is the Sun Going to Set on Florida?

There are only a few days left, and lawmakers have an urgent decision to make about Florida's future. While workers are going jobless and the Florida Legislature stands at the precipice of budgetary ruin, a very clear path to a prosperous future loaded with new jobs and true, long-term energy independence is bottled up in the Florida Legislature.

A Senate bill expected to be approved this week would require the state's utilities to buy an increasing amount of their electricity from renewable energy companies in Florida that produce solar, biomass and even wave-generated electricity. The Senate and governor are ready to act. But the House is an unknown, and the 2009 Legislature is scheduled to conclude Friday.

Gov. Charlie Crist and Sen. Jim King, R-Jacksonville, are pushing for 15 percent of our energy to come from renewable sources. Why? In large part because each megawatt of energy produced by solar is creating 15 to 30 jobs and each megawatt of biomass creates nine new jobs. These are real jobs based on an estimated 6,000 megawatts of renewable energy. The new market being created is likewise real. This new industry and jobs are so tangible that 28 states already have mandated such policies. Smart, forward-looking states are making this move - and doing so fast - for three reasons: jobs, energy independence and to reduce the causes of global warming.
These policies are spawning an entire new industry and marketplace for innovative small, and large, homegrown businesses. The money changing hands would stay in Florida, instead of going off to a corporation in another state.

Florida has sunlight. Florida has crops. Florida has ample tidal and solar thermal possibilities. Given all of this, Florida should already be the renewable energy capital of the world.

But there is one huge hurdle in the way: The House of Representatives is in disarray and is struggling to merely pass a budget. It's time for the House to get down to the business of the people.

Orlando: A leader in solar technology

Advanced Solar Photonics in the News

With warm weather and consistent sunshine, Florida is an ideal location for solar research and application. And with growing awareness of clean technology, Orlando is poised to become a leading force in the solar industry.

The existence of a strong technology cluster and proximity to the University of Central Florida (UCF) - one of the nation's top research universities - help set Orlando apart. In addition to research being conducted by UCF's Florida Solar Energy Center, local companies are working to leave their mark on the industry as well. Lake Mary based Advanced Solar Photonics is poised to become Florida's first photovoltaic solar manufacturer by producing thin-film solar panels. In nearby Longwood, SKYShades is merging shade structures and solar power by harnessing thin-film solar technology atop sidewalk umbrellas dubbed "Powerbrellas" in order to power small electronics.

For more information on the growing clean tech industry in Metro Orlando, click here.
Watch below as Executive Vice President of SKYShades, Joe McKenna, provides more info on the "Powerbrella."

http://www.youtube.com/watch?v=PjeUkqpWBFM&feature=player_embedded

Advanced Solar Photonics Celebrates Earth Day with e2

Advanced Solar Photonics, (ASP), the cutting-edge developer of laser marking, scribing, edge deletion and edge isolation systems for the solar industry is celebrating Earth Day on Wednesday, April 22nd, 2009 by announcing e2, their latest patent pending method, which increases a solar panels overall efficiency.

Traditionally, to anneal a coating on glass, the coating was applied to the glass, baked at 600 degrees Celsius, and then cooled for three to four hours. Using this new oven-less annealing process, the coating is applied to the glass and then a laser beam is swept over the surface to anneal. The Heat Affected Zone (HAZ) is limited and the material can be handled relatively soon after the annealing is complete. Researchers at Advanced Solar Photonics have discovered that with this newly developed oven-less laser annealing process the light transmission efficiency and conductivity of TCO layers are increased by up to 35%.

“There’s a lot of research going on now to increase solar panel efficiency,” said Maureen McHale, Advanced Solar Photonics Corporate Marketing and Public Relations Manager. “This new process is a huge breakthrough for Advanced Solar Photonics and the solar industry. Not only does using this new process increase efficiency, the e2process also lowers the electrical surface resistance, prevents de-lamination and performs recrystalization of amorphous silicon.”Glass that has been coated and annealed is used for such things as: architectural glass, as seen in large buildings and skyscrapers, windshields and solar panels.

Advanced Solar Photonics, located in Lake Mary, Florida employs an international team of technology driven professionals. Reaching out to the photovoltaic industry, ASP strives to lower manufacturing costs utilizing proven patented technology geared to improve and lower the cost per kilowatt. This technology is applicable to both the silicon and thin film processes.

Media Contact:

Maureen McHale

Corporate Marketing and Public Relations Manager

mmchale@advancedsolarphotonics.com

407-829-2613 x317

www.advancedsolarphotonics.com